Setting up T-SIX for Aileron channel mixing
By default, elevation channel is set on CH2, and aileron channel is set on CH3. To set up the T-SIX for Aileron channel mixing at CH2 and CH3:
- Go to Menu.
- Select Wing Tail.
- Set ELEVON to ACT.
- Go back.
- Select Reverse.
- Set AILE to R (Reverse).
That is it. Now you can control both rudders using the right transmitter stick.
The rudders should move in opposite direction when you move the stick horizontally, and in the same direction when you move the stick vertically.