SkyWalker X-8 Configuration
Our SkyWalker X-8 configuration is as follows:
Motor
Turnigy Aerodrive SK3 - 4240-740kv Brushless Outrunner Motor
Kv(rpm/v) 740
Weight (g) 195
Max Current(A) 50
Resistance(mh) 13
Max Voltage(V) 19
Power(W) 870
Shaft A (mm) 5
Length B (mm) 48
Diameter C (mm) 42
Can Length (mm) 23
Total Length E (mm) 70
ESC Speed Controller
TURNIGY Plush 60amp Speed Controller
Cont Current: 60A
Burst Current: 80A
BEC Mode: Switching
BEC : 5v / 3A
Input: 5.6v-22v
Weight: 60g
Size: 80x31x14mm
Supported motor speed for all TURNIGY ESCs is;
(Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
Propeller
Folding Carbon Fiber Propeller 13x7 (1pc)
Length (Inch [X]) 13
Pitch (Inch [Y]) 7
Weight 20gram
Spinner
Folding Prop Spinner 43mm / 5.0mm shaft
Prop Mount Bolts: 3.0mm
Weight: 47g
Yoke
Aeronaut Yoke for Turbo and Black 2-Blade Spinners
Aeronaut Yoke 47/8
33-45mm Spinner
Shoulder: 8mm
Blade Stopper
This was supposed to be in our configuration, but we eventually created it ourselves.
Aeronaut Fiberglass Blade Stopper for 2-Blade Folding Spinners (Black, Turbo)
Servo Motors
AeroStar AS-463HB Standard Servo 3.95kg / 0.12sec / 45.5g
Operating Speed: (4.8V) 0.15sec/60°
Operating Speed: (6V) 0.12sec/60°
Stall Torque: (4.8V) 3.25kg.cm
Stall Torque: (6V) 3.95 kg-cm
Dimensions: 40.5X20.3X38mm
Weight: 45.5g
Connector Wire Length: JR 265mm
Batteries
ZIPPY Flightmax 8000mAh 5S1P 30C
Capacity: 8000mAh
Voltage: 5S1P / 5 Cell / 18.5v
Discharge: 30C Constant / 40C Burst
Weight: 1054g (including wire, plug & case)
Dimensions: 170x69x44mm
Balance Plug: JST-XH
Discharge plug: 5.5mm Bullet-connector (without housing)
